This T-Hawk hop-up kit will unleash up to 50% more thrust using the standard 8.4V NiXX (NiCd/NiMH) packs, or 7.4V LiPo packs. One of our FullyMax 7.4V 1050mAH packs provide the same power and duration as our standard 8.4V NiMH packs at half the weight. Double your flight time using two of them in parallel with optional Y-adapter battery connector or if you're just getting started with LiPos, save a bundle with the complete LiPo-Charger-Adapter Combo.

Use of the stronger T-Hawk speed wing #40206 or #40208 is highly recommended to prevent wing folds in high speed manuevers. Further reinforcement is prudent before pushing the "envelope".

While the motor and ESC will support 3 cell 11.1V LiPo batteries, these power/speed levels are outside the design/performance parameters for the T-Hawk and therefore discouraged for all but those experienced enough to make airframe modifications needed for proper cooling and flight authority.

Kit includes installation hardware with instructions.

Features

• Perfectly matched system offers 50% more power for more speed and increased control in harsher weather
• Higher efficiency means longer flight times with cooler performance.
• 2.3mm Shaft Output allows use the same T-Hawk props used with speed 400 and 480 motor versions.
• 3.5 Gold Bullet Connectors
• HiFei 25-Amp Brushless ESC Programmable via Transmitter Throttle Sequencing
• Powerful 1810KV 260W Brushless 2815 Inrunner Motor
• Molex Battery Adapter included for use with standard T-Hawk NiMH packs
• Double flight times with optional Deans style Y adapter used with two 7.4V 1050mAh LiPo batteries
• Complete Installation hardware and instructions included
• Ships pre-programmed for use with both 8.4V NiMH or 7.4V LiPo packs (6V cut-off threshold)