ThunderBat XF KIT
(requires construction and all radio components)

ThunderBat XF Kit Assembly Instructions

ThunderBat XF Flight Manual

FEATURES:
Wing & Tail construction: injection molded EPO foam, white in color
Turtle Deck: vacuum formed PVC, white in color
Nose: blow molded PE, white in color
Landing gear: None, model should be hand launched and belly landed
Hardware included: Pushrods, control horns, clevis connectors, hook and loop material for battery
Motor Mount: Black plastic construction
Aileron + Elevator control
Fiberglass tail spars (embedded): 3.9" (10cm) long by .08" (2mm) diameter

INCLUDES:
Foam wing/fuselage+tail set, turtle deck; nose;three wire
pushrods (1mm (.039") diameter), wing servo well covers,motor mount, hardware kit, decal sheet and illustrated assembly
instructions.

REQUIRES:
Electric Motor -Item#20604 or equiv
Propeller: Item#60300 or equiv
Speed Controller: 3 cell LiPo compatible
Battery - 3 cell 750mAh LiPo pack
Radio: Minimum 3 channel
Servos: 2 required Item#20211 or equiv (8-9 gm) for ailerons and elevator
Gyro: optional (Esky EK2-0704 or equiv)
Servo Extension 15": one required
Aileron Y-cable: one required, 2" minimum length

SPECS:
Wingspan: 24" (600mm)
Wing Area: 188 sq in (12 sq dm)
Weight: 11oz (320g)
Length: 28" (710mm)
Airfoil: Symmetrical

COMMENTS:
This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator or low temp "foam safe" hot glue are recommended.