[ Home > T-HAWK TRAINER PARTS ]
T-HAWK TRAINER ONLY PARTS |
|
This wing is ideal to reduce flying speed for easier learning! Fabricated by splicing 3 sections of the standard high performance wing reinforced with wood and carbon fiber rods. A nylon tension wire is now included to provide additional curvature and stiffness for improved handling and responsiveness. The extra 17" in length provides an additional 39 sqin of lift area with only 2.5 oz weight increase. Inset photo shows standard wing resting on top of the training wing for size comparison only. Ships UPS Ground Separately Out of Stock - Order Pending |
|
|
| Provides additional curvature and stiffness for improved handling and responsiveness. Monofilament nylon line for high strength and elasticity. Includes installation instructions. |
|
|
| Compatible 72MHz fuselage replacement with all parts installed, including optional receiver for 72MHz trainer
package versions only. |
|
|
| Compatible 27MHz fuselage replacement with all parts installed, including optional receiver for 27MHz trainer
package versions only. |
|
|
| Replacement for Trainer Version of T-Hawk Only. Note tail boom is 2" longer than the standard version. Includes hardware (see inset). Note this Housing+Tailboom is suitable only for the Trainer Version of the T-HAWK. Click here for the standard version replacement.. |
|
|
| Replacement speed controller for the Trainer T-Hawk with flat spade motor connectors for direct connection to the 480 motor terminals. If your motor terminals are wire-soldered, then you must either remove the solder on the motor terminals, or remove the ESC motor connectors and solder the wires directly to the motor terminals. |
|
|
