
Esky 2.4GHz Lama V4 RC Helicopter EXTREME VALUE PACKAGE
This newest 2.4GHz Lama V4 version of the popular 4 Channel Esky 300 series RC electric helicopters is easier than ever to fly. The coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult while providing unsurpassed stability in all phases of the flight. Then consider the improved 2.4GHz RC system with brand new 2.4GHz intelligent spread spectrum transmission technology & digital DSK coding technology, coupled with brand new digital servos,which ensure a faster response for more precise control. With this system, several can fly together without the concern and hassle of crystal management. Whether you are a beginner or expert pilot looking for the best in coaxial micro helicopter performance, you'll enjoy many of the outstanding features that this Lama V4 has to offer.
Unlike toy helicopters usually with only two channels, the Lama V4 provides 4 channels for precise realistic control: Throttle for altitude, Roll for side-to-side, Pitch for forward-reverse and Yaw which allows you to rotate the helicopter in any desired direction while hovering or moving.
The Esky Lama V4 features a sleek modern body with split fuselage connected by two carbon fiber rods for easy access to the internals and is extremely durable.
This Ready-To-Fly Out-Of-The-Box RC electric helicopter includes everything you need to fly and includes a transmitter simulator cable and FMS software for practice on your computer. The pre-installed main motors, 4-in-1 control unit receiver, mixer, ESC, and gyro, the high speed, high performance micro servos, and powerful 800mAh Li-po battery pack, you'll have extended flight time per charge (10-15 minutes)
The Standard 2.4GHz Lama V4 Package Includes:
- Helicopter Body (Blue) with one spare blade set
- New 4-channel 2.4GHz USA Mode-2 Transmitter with intelligent spread spectrum transmission technology & digital DSK coding technology, with Trainer Switch, Trainer/FlightSIM Port, SIM cable and AA batteries
- Mix controller: 4 in 1 mix controller (Including gyro,mixer,ESC,New 2.4Ghz receiver)
- New High Speed Digital servos
- 7.4V 800mAh Li-Polymer battery & charger w/AC adapter and 12VDC clips
- Quick Start Guide and Manual plus FMS simulator software disk
Our Extreme Value Package (EVP) includes
the standard package,
plus the following
FREE EXTRAs , that will get you past the
bumps in the learning curve
without the delay or additional expense
of a second parts order.
|
|
|
|
|
Spare Top Blades 6pcs |
Spare Bottom Blades 6pcs |
Blade Removal Tool |
Spare Skid Set |
The FREE EXTRAs included with this Extreme Value Package
would cost $25 + shipping if purchased separately.
That's EXTREME VALUE!
Browse our complete Esky Lama V4 parts list below for anything else you might like to include and take advantage of the FREE SHIPPING!.
|
 |
Esky Heli S300 7.4V 800mAh LiPo Battery
|  | Esky Heli S300 Top Blades Pkg of 6 (Blade type A)
|
 |
 |
Esky Heli S300 Bottom Blades Pkg of 6 (Blade Type B)
|  | Esky Heli S300 Allen Key
|
 |
 |
Esky Heli S300 Stabilizer Set
|  | Esky Heli S300 Landing Skid Set for LamaV4
|
 |
 |
Esky Heli S300 Servo
|  | Esky Heli S300 Battery Holder for LamaV4
|
 |
 |
Esky Heli S300 "4in1" Control Unit 72MHz
|  | Esky Heli S300 Motor #1 with Pinion
|
 |
 |
Esky Heli S300 Motor #2 with Pinion
|  | Esky Heli S300 Silver Canopy & Tail for LamaV4
|
 |
 |
Esky Heli S300 Silver Canopy for LamaV4
|  | Esky Heli S300 Silver Tail for LamaV4
|
 |
 |
Esky Heli S300 Blue Canopy & Tail for LamaV4
|  | Esky Heli S300 Blue Canopy for LamaV4
|
 |
 |
Esky Heli S300 Blue Tail for LamaV4
|  | Esky Heli S300 Frame Kit for LamaV4 or CoComanche
|
 |
 |
Esky Heli S300 Inner Shaft
|  | Esky Heli S300 Main Blade Grip Set
|
 |
 |
Esky Heli S300 Swashplate
|  | Esky Heli S300 Swashplate Control Rod Set
|
 |
 |
Esky Heli S300 Rotor Head & Link Set
|  | Esky Heli S300 Gear & Shaft Set A
|
 |
 |
Esky Heli S300 Gear & Shaft Set B
|  | Esky Heli S300 Bearing 2x6x3mm
|
 |
 |
Esky Heli S300 Bearing Set & Collar
|  | Esky Heli S300 Bearing 4x8x3mm
|
 |
 |
Esky Heli S300 Screw Sets
|  | Esky Heli S300 TX/RX Crystal Set 72.130 MHz (Band 17)
|
 |
 |
Esky Heli S300 TX/RX Crystal Set 72.170 MHz (Band 19)
|  | Esky Heli S300 TX/RX Crystal Set 72.210 MHz (Band 21)
|
 |
 |
Esky Heli S300 TX/RX Crystal Set 72.830 MHz (Band 52)
|  | Esky Heli S300 TX/RX Crystal Set 72.870 MHz (Band 54)
|
 |
 |
Esky Heli S300 Transmitter USB Simulator Interface Cord
|  | Esky Heli S300 Transmitter Trainer Cable Requires two Esky Transmitters with sim/trainer plug on the back side and at least one with a training toggle switch.

|
 |